HOMEProductCaster WheelWorkbenchRoller TrackContact Us
Roller Track Hanging Hook Connector

Roller Track Hanging Hook Connector

SKU: YRT-AC06

Roller Track Hanging Hook Connector for installing aluminum roller tracks, guide rails and flow rack lanes on square tube or profile rack structures.

Request a Quote

Product Specifications

Profilewhite zinc connector / bracket / hook
Typical Widthcustom
Load Capacityaccessory
Applicationroller track installation, square tube rack, aluminum profile rack, connector and hanger hardware
CustomizationLength, width, roller material, bracket, stopper, hook and connector can be customized.

What to Know Before You Specify This Unit

Roller Track Hanging Hook Connector is the part nobody orders enough of and everybody needs on installation day. It costs a fraction of the rail, and it decides whether the assembled rack behaves like one structure or like a collection of parts leaning on each other.

Points that decide whether it works on your floor

  • Order a working spare percentage. Furniture that arrives one fitting short sits unusable for a week waiting for a small parcel.
  • Ask for the specified bolt torque. These joints hold by clamping friction, and hand-tight varies by a factor of two between fitters.
  • Photograph the actual joint you are replacing. It is faster than describing it and eliminates the wrong-part mistake.
  • Confirm compatibility with your frame — square tube, profile tube and aluminium rail systems use different fixing geometry even at the same nominal width.
  • Check whether the fitting needs a specific tool or just a hex key — an assembly line stops if that tool is missing.
  • Zinc plating versus stainless is a real decision wherever there is washdown, humidity or coastal freight.

Frequently Asked Questions

Will this fit our existing frame?

Confirm tube type and size — square tube, profile tube and aluminium rail take different fixing hardware even at similar widths. Send a photograph of the frame joint if you are unsure.

What torque should these be tightened to?

Ask your supplier for the figure rather than guessing; it should be stated on the drawing. The joint holds by clamping friction and hand-tight varies widely between fitters.

How do I know how many I need?

Count every joint, bracket location and stopper point on your rack drawing before ordering. This hardware is priced per piece and installation stops dead for want of two brackets.

RFQ Information to Prepare

Related Roller Track Products

Need Custom Roller Track or Flow Rack?

Send container size, load weight, rack drawing or application photo. Yusilean can recommend roller track, guide rail and connector hardware.

Contact Yusilean