HOMEProductCaster WheelWorkbenchRoller TrackContact Us
Turnover Box Guide Rail for FIFO Rack

Turnover Box Guide Rail for FIFO Rack

SKU: YRT-GR05

Turnover Box Guide Rail for FIFO Rack keeps cartons, bins and turnover boxes aligned in roller track racks.

Request a Quote

Product Specifications

Profileguide rail / side guide
Typical Widthcustom
Load Capacityguide only
Applicationcarton flow, tote flow, turnover box rack, assembly line material supply
CustomizationLength, width, roller material, bracket, stopper, hook and connector can be customized.

What to Know Before You Specify This Unit

Turnover Box Guide Rail for FIFO Rack does almost no work and prevents almost every jam. Its only job is to keep cartons inside their lane, and when it is missing, too narrow, or mounted too low, one turned box stops an entire pick face.

Points that decide whether it works on your floor

  • Adjustable guides cost slightly more and save every future change of carton size. Fixed width is fine only if your packaging never changes.
  • Check the guide at the pick face specifically — this is where operators reach in past the guide and where it gets bent.
  • For mixed carton heights, guide the tallest. Guiding the shortest leaves nothing to stop a tall box tipping.
  • Height matters as much as width. A guide shorter than half the carton height lets boxes climb during a fast feed.
  • Lane dividers should be smooth on both faces. Anything protruding becomes a catch point on every pass.
  • Set guide width a few millimetres wider than the widest carton you will run — enough clearance to slide, not enough to turn.

Frequently Asked Questions

How much clearance should a turnover box guide rail for fifo rack have?

A few millimetres beyond the widest carton in the lane. Too tight and boxes bind, too loose and narrow boxes rotate and jam.

Can guides be adjusted after the rack is built?

Adjustable profiles can, and they are worth the small premium wherever carton sizes change seasonally. Fixed guides are fine for operations with one box size forever.

What causes recurring jams in a gravity lane?

Almost always either the guide height is too low for the carton, the lane is too wide for the narrowest box, or debris has embedded in the rollers. Check in that order.

RFQ Information to Prepare

Related Roller Track Products

Need Custom Roller Track or Flow Rack?

Send container size, load weight, rack drawing or application photo. Yusilean can recommend roller track, guide rail and connector hardware.

Contact Yusilean