Workbench ProductsCategoriesContact Yusilean
Workbench Products / Lean Pipe Workstations and Carts / YWB-LP01
Lean Pipe Modular Workstation

Lean Pipe Modular Workstation

SKU: YWB-LP01

Original Category ImageCustom SizeFactory Direct

Flexible pipe workstation for kaizen, assembly and material preparation.

This product page uses images only from its original source folder. No images are mixed across different categories.

Request a Quote

Product Specifications

Product TypeLean Pipe Workstations and Carts
Structure OptionLean pipe, aluminum profile, belt conveyor, roller track or customized modular structure
Typical SizeCustom length, width and height according to workstation or rack layout
ApplicationAssembly, inspection, electronics, packing, repair, material supply, warehouse and workshop operations
CustomizationOEM/ODM size, color, load capacity, layout and packaging supported

Applications

Lean Pipe Modular Workstation is suitable for factories that need organized workstations, better material flow, cleaner 5S management and flexible line-side operation.

What to Know Before You Specify This Unit

A lean pipe modular workstation is chosen for one reason above all: it will be changed. If there is any chance this station gets reconfigured within the year, a bolted pipe-and-joint frame lets one person rebuild it in an afternoon with a hex key. A welded frame does not. That flexibility is the whole product.

Our published load tables for 28 mm tube show how sharply capacity falls as span grows; 28 mm lean pipe load ratings by span and wall thickness gives the full figures if you are sizing a shelf or frame.

Points that decide whether it works on your floor

  • ESD versions use a dissipative coating with surface resistivity in the 10^6 to 10^9 ohm range. Confirm which version you are buying before it lands.
  • Put the heavy things on the bottom shelf. It is not about capacity — it lowers the centre of gravity and shortens the lever arm when somebody leans or a cart knocks the frame.
  • Mark every joint with a paint pen after assembly. If the line is broken later, something has moved, and you can see it from across the aisle without touching anything.
  • Retorque every joint 24 to 48 hours after assembly. The PE or ABS coating creeps under clamping pressure and joints measurably loosen in the first weeks.
  • Nothing published covers sideways load. Assume the catalogue figure is vertical only, and ask how the frame behaves if somebody leans on a corner.
  • Load capacity is decided by span, not by how heavy the tube looks. Reducing the unsupported width of a shelf from 1200 mm to 600 mm nearly triples what it carries — far more than upgrading to thicker tube.

Frequently Asked Questions

Is an ESD version available?

Yes. Dissipative-coated tube and tops bring surface resistivity into the 10^6 to 10^9 ohm range. State ESD in the enquiry so the correct components are quoted rather than standard stock.

How much weight can a lean pipe modular workstation carry?

It depends on span more than on the frame itself. As a rule of thumb the deflection limit governs anything past roughly a metre of unsupported width, so reducing the span buys far more capacity than upgrading tube thickness. See our load tables for the underlying figures.

Can the workstation be reconfigured later?

Yes — that is the point of pipe and joint construction. Frames can be cut, extended or rebuilt with hand tools. Keep the original joint hardware and every future rebuild stays cheap.

RFQ Information to Prepare

Related Products

Need a Custom Workbench or Rack?

Send your drawing, size, load requirement or factory layout. Yusilean can recommend a practical workstation structure and quotation plan.

Contact Yusilean