
Aluminum Side Guide Rail for Roller Track
YRT-GR01
Aluminum Side Guide Rail for Roller Track keeps cartons, bins and turnover boxes aligned in roller track racks.
Total 6 products.

YRT-GR01
Aluminum Side Guide Rail for Roller Track keeps cartons, bins and turnover boxes aligned in roller track racks.

YRT-GR02
Adjustable Guide Rail for Flow Rack Lane keeps cartons, bins and turnover boxes aligned in roller track racks.

YRT-GR03
Metal Guide Rail for Carton Flow Rack keeps cartons, bins and turnover boxes aligned in roller track racks.

YRT-GR04
Left and Right Guide Rail Set keeps cartons, bins and turnover boxes aligned in roller track racks.

YRT-GR05
Turnover Box Guide Rail for FIFO Rack keeps cartons, bins and turnover boxes aligned in roller track racks.

YRT-GR06
Lane Divider Guide for Roller Track Rack keeps cartons, bins and turnover boxes aligned in roller track racks.
Side guide rail does almost no work. It carries no load, it has no rollers, and on a quotation it is a rounding error. Its entire job is to keep a carton in its lane, and when it is missing, too narrow, mounted too low, or set for the wrong box, a single turned container stops an entire pick face.
The two dimensions that matter are width and height, and both are usually set from the wrong reference. Width should be a few millimetres wider than the widest carton in the lane — enough clearance to slide, not enough to rotate. Height should be at least half the carton height; a low guide lets a fast-moving box climb over it during feed.
A lane running several box sizes needs either an adjustable guide or a dedicated lane per size. Trying to serve mixed sizes with one fixed guide is the most common cause of recurring jams in gravity systems — and the least expensive to fix, once it is diagnosed as a guide problem rather than a rail problem.