Double-Side Belt Line Workstation

Name: Double-Side Belt Line Workstation
Brand: Yusilean
SKU: YWB-BC02

SKU: YWB-BC02

Original Category ImageCustom SizeFactory Direct

Two-sided belt conveyor workstation for balanced operator workflow.

This product page uses images only from its original source folder. No images are mixed across different categories.

Request a Quote

Product Specifications

Product Type

Belt Conveyor Assembly Line Workbenches

Structure Option

Lean pipe, aluminum profile, belt conveyor, roller track or customized modular structure

Typical Size

Custom length, width and height according to workstation or rack layout

Application

Assembly, inspection, electronics, packing, repair, material supply, warehouse and workshop operations

Customization

OEM/ODM size, color, load capacity, layout and packaging supported

Applications

Double-Side Belt Line Workstation is suitable for factories that need organized workstations, better material flow, cleaner 5S management and flexible line-side operation.

What to Know Before You Specify This Unit

A double-side belt line workstation is built around one question most buyers never write down: how many seconds does one unit spend at one station? Everything on this bench — belt width, belt speed, frame length and drive power — follows from takt time, not from the size of the room. Start there and the rest of the specification almost writes itself.

Points that decide whether it works on your floor

Frame length is station pitch multiplied by station count, plus room at each end for in-feed and out-feed. Buyers who order by room length usually end up short at one end.
Frame material decides whether this line can be moved next year. Bolted frames can be dismantled and reassembled; welded ones cannot.
Belt width follows the largest part plus hand clearance on both sides; going wider later means replacing the whole belt, not trimming it.
Lighting, documentation holders, air and power rails get bolted to the frame afterwards. Decide where before the frame is cut, because retrofitting overhead channels onto an assembled line is miserable work.
Worktop edges and station pitch should match how operators actually reach. A line that forces a twist in the torso produces the same complaints as a badly set chair.
Belt speed should be set so that one operator finishes one unit before the next arrives. Faster than that and you have built a queue with a motor on it.

Frequently Asked Questions

What information do I need before requesting a quote for a double-side belt line workstation?

Station count and station pitch, belt width and belt type including whether you need anti-static, load per station in kilograms, frame material preference, and destination port. A rough layout sketch shortens the exchange considerably.

Can the belt speed be adjusted after installation?

On a variable speed drive, yes, and you should — belt speed is the first thing that needs tuning once real takt time differs from the estimate. Specify the drive at order stage; adding it later costs several times what it would have.

How does the workbench integrate with existing production lines?

Frame height and belt height need to match the adjacent conveyor, and the drive unit needs clearance and power at one end. Send the interface dimensions and the frame can be built to meet them.

RFQ Information to Prepare

Required size: length, width and height.
Load capacity and tabletop, belt, roller or rack requirement.
Application photos or simple layout drawing.
ESD, lighting, drawer, caster, shelf, belt or roller track requirements.
Order quantity and destination country.

Need a Custom Workbench or Rack?

Send your drawing, size, load requirement or factory layout. Yusilean can recommend a practical workstation structure and quotation plan.

Contact Yusilean