Belt Line Packing Workstation

Name: Belt Line Packing Workstation
Brand: Yusilean
SKU: YWB-BC06

SKU: YWB-BC06

Original Category ImageCustom SizeFactory Direct

Conveyor workstation for packing, labeling and product transfer.

This product page uses images only from its original source folder. No images are mixed across different categories.

Request a Quote

Product Specifications

Product Type

Belt Conveyor Assembly Line Workbenches

Structure Option

Lean pipe, aluminum profile, belt conveyor, roller track or customized modular structure

Typical Size

Custom length, width and height according to workstation or rack layout

Application

Assembly, inspection, electronics, packing, repair, material supply, warehouse and workshop operations

Customization

OEM/ODM size, color, load capacity, layout and packaging supported

Applications

Belt Line Packing Workstation is suitable for factories that need organized workstations, better material flow, cleaner 5S management and flexible line-side operation.

What to Know Before You Specify This Unit

A belt line packing workstation is built around one question most buyers never write down: how many seconds does one unit spend at one station? Everything on this bench — belt width, belt speed, frame length and drive power — follows from takt time, not from the size of the room. Start there and the rest of the specification almost writes itself.

Points that decide whether it works on your floor

Frame length is station pitch multiplied by station count, plus room at each end for in-feed and out-feed. Buyers who order by room length usually end up short at one end.
Ask where the drive unit sits and what clearance it needs at the end. This is the part nobody measures and the part that blocks an aisle after installation.
Worktop edges and station pitch should match how operators actually reach. A line that forces a twist in the torso produces the same complaints as a badly set chair.
Belt speed should be set so that one operator finishes one unit before the next arrives. Faster than that and you have built a queue with a motor on it.
Plan the reject path before installation. Every line needs somewhere for a suspect unit to go other than the floor.
Ask whether the belt surface is anti-static. For electronics assembly a standard PVC belt generates charge and quietly defeats every ESD measure on the bench.

Frequently Asked Questions

What information do I need before requesting a quote for a belt line packing workstation?

Station count and station pitch, belt width and belt type including whether you need anti-static, load per station in kilograms, frame material preference, and destination port. A rough layout sketch shortens the exchange considerably.

How does the workbench integrate with existing production lines?

Frame height and belt height need to match the adjacent conveyor, and the drive unit needs clearance and power at one end. Send the interface dimensions and the frame can be built to meet them.

Can the belt speed be adjusted after installation?

On a variable speed drive, yes, and you should — belt speed is the first thing that needs tuning once real takt time differs from the estimate. Specify the drive at order stage; adding it later costs several times what it would have.

RFQ Information to Prepare

Required size: length, width and height.
Load capacity and tabletop, belt, roller or rack requirement.
Application photos or simple layout drawing.
ESD, lighting, drawer, caster, shelf, belt or roller track requirements.
Order quantity and destination country.

Need a Custom Workbench or Rack?

Send your drawing, size, load requirement or factory layout. Yusilean can recommend a practical workstation structure and quotation plan.

Contact Yusilean