Custom Belt Conveyor Bench

Name: Custom Belt Conveyor Bench
Brand: Yusilean
SKU: YWB-BC13

SKU: YWB-BC13

Original Category ImageCustom SizeFactory Direct

Custom belt conveyor bench based on width, length and speed requirement.

This product page uses images only from its original source folder. No images are mixed across different categories.

Request a Quote

Product Specifications

Product Type

Belt Conveyor Assembly Line Workbenches

Structure Option

Lean pipe, aluminum profile, belt conveyor, roller track or customized modular structure

Typical Size

Custom length, width and height according to workstation or rack layout

Application

Assembly, inspection, electronics, packing, repair, material supply, warehouse and workshop operations

Customization

OEM/ODM size, color, load capacity, layout and packaging supported

Applications

Custom Belt Conveyor Bench is suitable for factories that need organized workstations, better material flow, cleaner 5S management and flexible line-side operation.

What to Know Before You Specify This Unit

A custom belt conveyor bench is built around one question most buyers never write down: how many seconds does one unit spend at one station? Everything on this bench — belt width, belt speed, frame length and drive power — follows from takt time, not from the size of the room. Start there and the rest of the specification almost writes itself.

Points that decide whether it works on your floor

Ask whether the belt surface is anti-static. For electronics assembly a standard PVC belt generates charge and quietly defeats every ESD measure on the bench.
Belt width follows the largest part plus hand clearance on both sides; going wider later means replacing the whole belt, not trimming it.
Worktop edges and station pitch should match how operators actually reach. A line that forces a twist in the torso produces the same complaints as a badly set chair.
Lighting, documentation holders, air and power rails get bolted to the frame afterwards. Decide where before the frame is cut, because retrofitting overhead channels onto an assembled line is miserable work.
Belt speed should be set so that one operator finishes one unit before the next arrives. Faster than that and you have built a queue with a motor on it.
Frame length is station pitch multiplied by station count, plus room at each end for in-feed and out-feed. Buyers who order by room length usually end up short at one end.

Frequently Asked Questions

How does the workbench integrate with existing production lines?

Frame height and belt height need to match the adjacent conveyor, and the drive unit needs clearance and power at one end. Send the interface dimensions and the frame can be built to meet them.

What information do I need before requesting a quote for a custom belt conveyor bench?

Station count and station pitch, belt width and belt type including whether you need anti-static, load per station in kilograms, frame material preference, and destination port. A rough layout sketch shortens the exchange considerably.

Can the belt speed be adjusted after installation?

On a variable speed drive, yes, and you should — belt speed is the first thing that needs tuning once real takt time differs from the estimate. Specify the drive at order stage; adding it later costs several times what it would have.

RFQ Information to Prepare

Required size: length, width and height.
Load capacity and tabletop, belt, roller or rack requirement.
Application photos or simple layout drawing.
ESD, lighting, drawer, caster, shelf, belt or roller track requirements.
Order quantity and destination country.

Need a Custom Workbench or Rack?

Send your drawing, size, load requirement or factory layout. Yusilean can recommend a practical workstation structure and quotation plan.

Contact Yusilean