
PVC Hard Pipe 40-160mm | Water Supply Plastic Pipe | Yusilean
What to Know Before You Order
PVC Hard Pipe 40-160mm is specified where the medium, not the structure, is the constraint — chemical compatibility, pressure and connection type decide the part rather than load capacity.
Points that decide whether it works
- PVC systems are specified by pressure rating and connection type, not by diameter alone. Confirm both before ordering, because a socket fitting and a threaded fitting of the same nominal size are not interchangeable.
- Support spacing matters more than most installers expect. PVC softens and sags under heat and sustained load, so add supports rather than arguing with a warranty later.
- Allow for thermal expansion on long runs. Rigid pipe clamped at both ends will either buckle or pull a joint apart as temperature moves.
- Keep the pipe out of direct sun in storage. UV degrades PVC faster than most people assume, and stock left outside for a season is not the same material.
- Solvent welding is permanent. Where a joint may need to come apart for maintenance, use a threaded or compression connection at that point rather than cementing everything.
Frequently Asked Questions
Can the joints be taken apart later?
Threaded and compression connections can; solvent-welded joints cannot. Plan which points need future access before assembly rather than after.
Is it suitable outdoors?
Not for long exposure. UV degrades PVC, and pipe stored or installed in direct sun loses impact strength faster than most specifications admit.
What pressure rating do I need?
Match the rating to the highest pressure the line will see, not the working pressure of normal operation. Water hammer in a suddenly closed line routinely exceeds steady-state pressure.








